Wednesday, February 2, 2011

DIY Wednesday: Seriously Cheap Floor Rug!

Hi Everyone!

As you know, we've moved and are in the process of decorating a very large house. Our previous home had all carpeted floors and our new home's very large bedroom is all hard surface. (Not really hardwood per se...looks like the subfloor I had on my floor in my old home)

Not only can it be cold, and the unfinished floor can pinch your toes, but the hard surface means that every time our large German Shorthair Pointer jumps out of bed it's loud and not only wakes us, the other two dogs but has been known to wake the baby.


Our bed with our new carpet rug!

So, since we rent, carpeting isn't really an option. But a rug is. However, we have a king size bed. A rug that would fit under the bed (which is approximately 6 feet by 7 feet) and still be big enough to muffle the sound of a dog falling out of bed would be quite expensive. Like around $300 expensive...for a lame boring not soft one.

I've googled "cheap rug" at least a hundred times trying to find a solution. Over and over, carpet remnants would come up but usually websites would say that it wasn't a great idea and it would unravel. You'd have to get it bound to prevent that and it would be expensive.

Well....bounding is easy enough. Get a remnant and save a load of money!

Step One: Go get a remnant.



"Before" Image. Hard floor.


I went to my local Lowes and found a nice looking remnant. It was 5 feet wide and 12 feet long. An odd measurement, but I decided I'd work with it for $47.00. I then cut it in half with a utility knife. A great way to get a straight line is a chalk line. Just use a utility knife along the chalk line. My dad discovered this while installing carpet in my old house. I cut mine pretty odd (in a U shape) under the bed so I wouldn't waste rug that wouldn't be used. So my rug actually ended up looking like it was around 10 feet by 10 feet. My rug didn't have an attached pad, but still was plush. If you could manage one with pad, I think you're rug would be even more comfortable.

After purchasing my remnant, I got my binding supplies: some grosgrain wide ribbon in a matching color and hot glue sticks. (I use grosgrain because it doesn't show hot glue as easy) Those purchases cost about $5.00

Therefore, I ended up with a rug that was 6 feet by 10 feet (but looked like it was 10 feet by 10 feet) for $52.00. That's right $52.00!!!

Step Two: Leave it or Bind it

Now, you can leave the rug without binding, especially if you're not going to use the rug for a long time. Or you can bind it.


Unfinished Edge

First, start by working around the edges and hot gluing the ribbon to the carpet. I found the easiest way to do this is to first glue the ribbon to the back of the remnant. This allows two things: the ribbon to look even on the front and allows you more control on the front.

Of course, you need to work in small segments since the glue dries quickly.


Working my way around the edge of the remnant.

You will probably find that the process gets easier the longer you do it, therefore, I'd start on a section that will be hidden if you can. The main issue you want to watch is keeping the ribbon even on the front. You can also choose to put less ribbon on the front for a different more polished look. I wanted to make sure I got all the loose fibers got caught so I went a bit wide.



Finished Binding


"After" Picture (with my lovely German Shorthair Pointer, Cash, modeling the bed)

Now, that looks much better! Now I just have to 1) Make a headboard 2) Make a duvet cover and 3) Paint my night stands...then just half of the bedroom will be done!
I'm tired thinking about it!


Share:

DIY Wednesday: Valentine's Garland & Cards

Hi There,

Time for some Valentine's decorations! I usually only decorate for Christmas, but since I now have a child, I kinda like to get in the celebratory spirit for each holiday (even the "greeting card" ones!)

I did a very simple project with scrapbook paper. I tried to mix it up and put some blue in and different textures even if it's a simple project. I simply cut the paper into different size hearts, used a hole punch on each side of the heart and threaded some ribbon through.






These are some Valentines me and my 9 month old daughter made. It was her first time coloring...she was a bit more interested in eating the crayons rather than using them :)








Share:

Sunday, January 30, 2011

Featured on Knock-Off Wood Ana-white.com

Hi Everyone,

The shelves I made for my daughter's room were recently featured on Ana-White.com's Brag Blog (formally known as Knock Off Wood). The shelves were my first attempt at wood working, and they seemed to work out all right.

Visit Ana-White.com for the post!


Shelves "After" They turned out great and really display her large book collection.



The "Before" wall. Nothing going on.



Shelves are up, but I haven't gotten to put my "designer" touch on them!



They look great! I like that I can finally put up some of her more breakable items and they will still be out of her reach.



Just for fun here is the the opposite corner of the room. Fun owl art and picture frames that were a gift from our friend Quinn.



Share:
Blogger Template Created by pipdig